18 TEAK STEP 2
Usage
- Does not affect seals
- Renovator
- Does not oxidize stainless steel
Characteristics of TEAK STEP 2
Formulated and tested by our laboratory specifically for teak boating.
Brightener & Stabilizer teak for best results.
Two steps: TEAK STEP 1 – TEAK STEP 2
Instruction of use
1. Dosage
Apply pure or diluted to 50% with water depending of the condition of the teak after having applied T17 TEAK STEP 1.
2. Teak Step 2
With a soft and clean brush, spread T18 TEAK STEP 2 softly. Your teak will clear up for regaining its beautiful original appearance.
3. The reaction
Then rinse with plenty of water, rubbing softly to avoid damaging the fibers of the teak.
Technical Specifications:
Physical state: liquid Colour: colourless pH: 0,5 Density: 1,13
Storage: keep the bottle tightly closed and away from the cold and heat in a ventilated place.
Components: <5% non-ionic surfactants. The surfactants contained in this preparation comply with the criteria of biodegradability as defined in Regulation (EC) no 648/2004 on detergents.